Drag Pro™ 180Z Sold Out Available in 2021

Get your rear in gear with a DRAG PRO 180Z- the most versatile rear-mounted system available, with multiple blade positions and the ability to plow forward and in reverse. The DRAG PRO 180Z mounts from the rear using a universal fifth-wheel rail system and a receiver hitch, allowing you to pull snow from the back while clearing large areas like commercial parking lots. Rotating wings allow the operator to adjust quickly to various plowing situations, surface areas and job types. With advanced stability from the two-point attachment system the operator can freely plow forward, in reverse and in the Z-position.
  • 2-Point Attachment System Designed for 3/4 and 1-ton trucks with access to a universal fifth-wheel rail system and a receiver hitch. Installation of a standard fifth-wheel rail kit, available at most truck equipment retailers, is required. With both points of attachment (fifth wheel rails and receiver hitch) engaged, the DRAG PRO 180Z offers advanced stability, rigidity and reliability for performance.
  • No Shear Pins The hydraulic relief feature of the 180Z actively protects the wings and blades when in contact with an obstacle- in either forward or reverse.
  • Full 180-Degree Rotating Wings Rotating wings allow the operator to adjust quickly to various plowing situations, surface areas and job types. With advanced stability from the two-point attachment system, the operator can freely plow forward, in reverse and in the Z-position.
  • Front and Rear Productivity Combine Drag Pro 180Z with a front-mounted plow to increase productivity and cut time on the job up to 50%.
Specifications Drag Pro 180Z
Adjustable Raise/Lower Valve Standard
Attachment System Fifth-wheel rails and receiver hitch (2-point attachment)
Float and D-Force Standard
Lift Cylinder 2-3/8" x 1-3/16" x 12"
Moldboard Height 24"
Moldboard Thickness 7-ga steel
Moldboard Cutting Edge 1-1/4" x 6" UHMW (3.2 cm x 15.2 cm)
Truck Applications 3/4 & 1 Ton
Weight 1,450 lb w/hitch system (657.7 kg)
Width (Wings Extended - Outside Dimension) 16'
Width (Wings Folded - Outside Dimension) 100"
Wing Cutting Edges 2-1/4" x 1-1/6" x 9" (7 cm x 4 cm x 22.9 cm)
Wing Rotation 180°
Worklights Standard