FAQ01 - Will the new Pushframe TFR09708 work on all RT3 plows?
FAQ02 - Can the new Center Section (CHA09716) replace the old Center Section (CHA01019)?
FAQ03 - Why do the new plow boxes come without Plow Shoes or the Snow Catcher?
FAQ04 - Is there a way to slow down the angle function on a straight blade?
FAQ06 - Will the new Angle Cylinder (HYD09731) fit on an old Straight Blade or Trip Edge plow?
FAQ07 - Will the Blade Wing Extension Kits (MSC08042) work on all BOSS plows?
FAQ08 - After installing a set of HID Lights (MSC04817), the headlight fuses keeping shorting out. How can this be fixed?
FAQ09 - Will the new Formed Cutting Edges work on 2005 & older RT3 plows?
FAQ10 - Will tightening the Gland Nut on the new style Angle Cylinders stop the leaking in this area?
FAQ11 - Will the old style Plow Boxes work with the new Blade Crates?
FAQ12 - Can I use the existing Upfitter Switches that came on my 08 Ford Super Duty, instead of the Truck/Plow toggle switch that comes with my BOSS plow?
FAQ13 - How do I slow down the drop speed of my RT3 plow?
FAQ14 - I think I am missing the latch key that retains the coupler pin on one side of my plow?
FAQ15 - Has BOSS changed the MSC04251 Coupler Pivot Pin?
FAQ16 - Is it necessary to cut the front valance on the 1999 & Newer Chevy/GMC 2500HD/3500HD in order to obtain the recommended 15 1/2" Pushbeam height?
FAQ17 - How do I transport my plow if I have had a breakdown that prevents my plow from lifting?
FAQ18 - How do I adjust my RT3 Power-V so that the cutting edge sits level with the ground?
FAQ19 - How do I determine if my plow is the RTI, RTII or RTIII model?
FAQ20 - How do I determine which model of plow will fit my RT3 pushbeam?
FAQ21 - How do I slow the drop speed of my Sport Duty Straight Blade plow?
FAQ22 - Are the Power-V Flat Top plows discontinued?
FAQ23 - How do I safely secure my BOSS Product for transport?
