- FAQ01 - Will the new Pushframe TFR09708 work on all RT3 plows?
- FAQ02 - Can the new Center Section (CHA09716) replace the old Center Section (CHA01019)?
- FAQ03 - Why do the new plow boxes come without Plow Shoes or the Snow Catcher?
- FAQ04 - Is there a way to slow down the angle function on a straight blade?
- FAQ06 - Will the new Angle Cylinder (HYD09731) fit on an old Straight Blade or Trip Edge plow?
- FAQ07 - Will the Blade Wing Extension Kits (MSC08042) work on all BOSS plows?
- FAQ08 - After installing a set of HID Lights (MSC04817), the headlight fuses keeping shorting out. How can this be fixed?
- FAQ09 - Will the new Formed Cutting Edges work on 2005 & older RT3 plows?
- FAQ10 - Will tightening the Gland Nut on the new style Angle Cylinders stop the leaking in this area?
- FAQ11 - Will the old style Plow Boxes work with the new Blade Crates?
- FAQ12 - Can I use the existing Upfitter Switches that came on my 08 Ford Super Duty, instead of the Truck/Plow toggle switch that comes with my BOSS plow?
- FAQ13 - How do I slow down the drop speed of my RT3 plow?
- FAQ14 - I think I am missing the latch key that retains the coupler pin on one side of my plow?
- FAQ15 - Has BOSS changed the MSC04251 Coupler Pivot Pin?
- FAQ16 - Is it necessary to cut the front valance on the 1999 & Newer Chevy/GMC 2500HD/3500HD in order to obtain the recommended 15 1/2" Pushbeam height?
- FAQ17 - How do I transport my plow if I have had a breakdown that prevents my plow from lifting?
- FAQ18 - How do I adjust my RT3 Power-V so that the cutting edge sits level with the ground?
